[Supras] Crank snout dia. and flywheel fitment?

[Jim Jobe]

I think we bored one of the fidanza's out for someone
recently...

On Tue, Jan 08, 2008 at 12:05:26PM -0500, Walker, Brian (Rich. Dist) wrote:
> Thanks Malik, that's fast response time. It's tough to get an accurate
> measurement on the FW since you're measuring without a flat edge to keep
> the caliper 90deg. from the bore (likely the reason you're seeing the FW
> hole smaller than cranks) but you've verified the same numbers.
> 
> It's possible to heat the FW to get it in place but this shouldn't be
> required and it won't be easily removed as it should be.
> Brian
> 
> -----Original Message-----
> From: sprigmo1 [mailto:sprigmo1 at yahoo.com] 
> Sent: Tuesday, January 08, 2008 11:56 AM
> To: Walker, Brian (Rich. Dist)
> Subject: Re: [Supras] Crank snout dia. and flywheel fitment?
> 
> Just measured my 2 cranks.  Digital caliper as well.
> 6m = 41.03  7m = 41.02  Stock flywheel R154 = 40.78 Malik
> --- "Walker, Brian (Rich. Dist)"
> <Brian.Walker2 at VDOT.Virginia.gov> wrote:
> 
> > We were attempting to install a new flywheel this weekend and found 
> > that the centerbore was too small. I'm going to return the piece to 
> > the vendor as they seem to think it is correct. The dia.
> > I'm measuring (dig.
> > caliper) is 41.0mm on the crank and 40.88 on the flywheel bore, the 
> > stock flywheel is showing right around 41mm. I'm being told that the 
> > FW is only for a US engine in which case I thought all 7ms were 
> > (although many assembled in Japan)
> > 
> > Does anyone else have a measurement for the dia at the rear of the 
> > crank? Evidently others have not had issues with fitment.
> > Thanks,
> > Brian
> > 
> > 
> > 
> > 
> > _______________________________________________
> > Supras mailing list
> > Supras at supras.com
> > http://supras.com/mailman/listinfo/supras_supras.com
> > 
> 
> 
>   Malik
>   It Ain't Eazy Being Me!!!!
>   92Trbo Supra 367whp
>   92 Supra Turbo Targa, 
>  Blitz peek hold device, Apexi Super AFC, Apexi AVC-R, HKS 
>   Timing Gears,, K&N FIPKE, catch can modification, 
>    Apexi N1 Exhaust, Random Technology High flow 
>   CAT,  AEM UEGO Wideband 02 Unit, CSF 
>   Aluminum 52mm Race radiator, Walbro 
>   Racing Fuel Pump, Aeromotive AFPR, 
>   Horsepower Freaks 700hp custom Supra 
>   intercooler and hardpipes,  Greddy bov, HKS 
>   3000Pipe 
> 
> 
> 
> 
>  
> ________________________________________________________________________
> ____________
> Be a better friend, newshound, and 
> know-it-all with Yahoo! Mobile.  Try it now.
> http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ 
> 
> _______________________________________________
> Supras mailing list
> Supras at supras.com
> http://supras.com/mailman/listinfo/supras_supras.com