[Supras] Crank snout dia. and flywheel fitment?

[cthommes at adelphia.net]

Fidanza?

-Craig

---- "Walker wrote: 
> We were attempting to install a new flywheel this weekend and found that
> the centerbore was too small. I'm going to return the piece to the
> vendor as they seem to think it is correct. The dia. I'm measuring (dig.
> caliper) is 41.0mm on the crank and 40.88 on the flywheel bore, the
> stock flywheel is showing right around 41mm. I'm being told that the FW
> is only for a US engine in which case I thought all 7ms were (although
> many assembled in Japan)
> 
> Does anyone else have a measurement for the dia at the rear of the
> crank? Evidently others have not had issues with fitment.
> Thanks,
> Brian
> 
> 
> 
> 
> _______________________________________________
> Supras mailing list
> Supras at supras.com
> http://supras.com/mailman/listinfo/supras_supras.com