[Supras] Drivers side front knuckle

[cthommes at adelphia.net]

I'd suggest you just replace the bearing.  You don't want to cash in your known bad bearing for an uknown knuckle that may be worse or on it's way to the same fate.

The bearing of course must be R&R on a press, and any competent shop can do this.  Save a buck on labor by pulling the knuckle off for them if you'd like...

-Craig

---- Bob <bob at hairballcreations.com> wrote: 
> 
> Does anyone out there have a good drivers side knuckle for an 89.
> 
> I really need one because there is some play in the bearing.
> 
> I could just replace the bearing but past experience with a rear bearing on
> an MR2 revealed that they don't come out very well
> 
> Bob
> 
> 
> 
> 
> 
> _______________________________________________
> Supras mailing list
> Supras at supras.com
> http://supras.com/mailman/listinfo/supras_supras.com