[Supras] Master cylinder (brake) differences for NA/turbo?

[Walker, Brian (Rich. Dist)]

Thanks Dan, now does anyone know the different designations in the EPC
part numbers for this? There are 4 P/N's listed, several labeled 'LHD'
but a couple are not labeled. Two of them have a w/*66 designation.
Could this mean ABS?
Thanks again,
Brian

-----Original Message-----
From: Dan Gyoba [mailto:dgyoba at abstractconsulting.com] 
Sent: Monday, February 11, 2008 1:33 PM
To: Walker, Brian (Rich. Dist); Supras at supras.com
Subject: Re: [Supras] Master cylinder (brake) differences for NA/turbo?

On 11 Feb 2008 at 11:50, Walker, Brian (Rich. Dist) wrote:

> Does anyone know if the brake Master cyl. Is different between the 
> turbo and NA models? I've found a reman. Unit but it's listed for the 
> NA. I wasn't aware of differences in the braking systems on the mk3.
> These are much more affordable than a new Toyota unit so I'm hoping to

> go this route.
> 
> Thanks,
> Brian W-88T

The brake master from my NA looked identical to the one in my '87T parts
car.  All of the rest of the brake system also seems to be identical.

The one caveat though is that both my '89NA and the '87T parts car had
ABS.  I don't know if a non-ABS master would be the same (Though I
suspect that it would be, with the only difference being the
proportioning valve, and of course ABS actuator in the system)

Dan Gyoba
'89 NA 456,708 kms, Turbo swap COMPLETE
http://www.abstractconsulting.com/~dan