[Supras] 2JZ Probe

[Supras Ireland Admin]

Impressive work Dave,
Are you running your own custom parts on that motor?

Marty
SSi
www.supraspecialists.co.uk
Official sponsor of the Supra Owners Club Ireland
www.supras-ireland.net
Official Trader for the UK mk3 supra owners Club
www.mkiiisupra.net

Our lighter side Fun and chat site
http://www.bebo.com/Supra-Specialists

-------------------------------------------------------------
----- Original Message -----
From: "Dave Henry" <daveh at to4r.com>
To: "Supras at supras.com" <supras at supras.com>
Sent: Tuesday, September 11, 2007 4:16 PM
Subject: [Supras] 2JZ Probe


> Not sure if anyone here cares much about this hybrid thing we built, but
> I'll talk a little about it anyway.  ha.
>
> The engine is a stock 2JZGE shortblock with oem TT pistons and an oem TT
> head gasket.  The head is a stock un-ported GE head with stock valves,
> crower springs and retainers and a set of HKS 272 cams. Standard ARP head
> studs hold the two together.  We are running 36 psi with a GT4276, 1.15
a/r
> T4 and spraying a 75 shot out of the hole and through first gear.  The
spray
> shuts off when he shifts into 2nd (drive). we are using a AEM ems and the
> standard TT ignition setup (hks dli, etc).  This setup has ran every race
> weekend this year without a single failure (other than the timing belt
> pulley working loose on us once, whoops).  We made a best ever pass this
> last Sunday, the car cut a 1.21 60'.
>
> http://www.youtube.com/watch?v=T4EKyOt4rNI
>
> DaveH
>
>
> _______________________________________________
> Supras mailing list
> Supras at supras.com
> http://supras.com/mailman/listinfo/supras_supras.com
>