[Supras] Fuel pump resistor

[berniek at technicaldevelop.com]

Tom:

    Thanks for the reply.  From all that I have gathered from responses 
I either leave the stock resistor in place, or will lower the value by 
paralleling it with another resistor.  I do have a 57 trim CT26 which 
will be set to 15 PSI, so I hope the relay that shorts out the resistor 
pulls in from the ECU under any boost condition of more than a few PSI.  
If not, I'll power a relay from the WOT switch. 

    Take care. 

       BernieK