[Supras] Cleaning garage

[Mike Long]

I am working on clearing out the garage of extra parts as I ready my
swap project. For now I am just making the announcement of parts I
have which I will relist with prices in the near future, but will
still entertain offers for now.

1 - alternator, unknown condition
1 - upper intake manifold, just the manifold nothing else
1 - lower intake manifold, just the manifold nothing else
1 - fuel rail
1 - set of 7M-GTE valve covers

1 - clean 7M-GTE block with main caps.  Block has been cleaned, honed,
and painted red, unknown mileage -
http://picasaweb.google.com/milisakeracing/SupraEngine for pics

1 - 7M-GTE head, unknown mileage. I believe I have all of the valves,
shims, cam caps, etc...some were taken out before I picked up the head
and put in a small tool box.
http://picasaweb.google.com/milisakeracing/SupraEngine for pics

1 - set of 7M-GTE cams
1 - misc. brackets
2 - turbo elbows
1 - CT26 - needs rebuild, enough play that the compressor wheel hits
the housing or comes pretty darn close -
http://picasaweb.google.com/milisakeracing/SupraEngine for pics

1- oil supply/return tubes

3 - 17x7 Kosei Racing Seneca wheels. Cast, light weight, 7-spoke alloy
wheel, +35 offset with two bolt patterns, one of which is 5x114.3mm
(4.5"). I have three, two of which have some rash and could use some
cleaning as well. Original price: $236 per wheel. I'll take $150 for
all three, obo.

2 - 16x7.5 Moda Radius R1 wheels. Light weight, 5-spoke wheels, +45
offset w/5x114.3mm (4.5") bolt pattern. Little bit of rash as well.
Looking for $100 obo for the pair.
http://picasaweb.google.com/milisakeracing/KoseiAndModaWheels for pics

2 - pairs of winter tires
a. 2xYokohama IceGuards, 205/55R16
b. 2xYokohama IceGuards, 215/45R17

Both sets have lots of tread left as seen in the pictures. Would like
$75 obo for each pair.
http://picasaweb.google.com/milisakeracing/YokohamaIceGuards for pics

1 - running 7M-GTE engine, unknown mileage, still in my car at the
moment if anyone is close enough to take it for a test drive (and help
pull it...). Should be ready to pull in two-three more weeks.  Will
not include the PS pump & reservoir, A/C compressor, ECU, or
engine/engine bay wiring harnesses (engine will have harness stripped
off carefully to avoid cracking too many connectors)

Shortly after purchasing the car, I replaced the CT26 turbo with a
used one with less shaft play plus all gaskets involved with the
replacement (both sides of turbo elbow, O2, turbo-to-manifold,
manifold-to-block, oil supply/return line), replaced IC pipes from
turbo to IC with hard pipes, replace exhaust manifold due to a crack
and helicoiled the head (replaced with new studs as well), and
replaced valve cover gaskets and valve cover screws with SS hex bolts
and star locking washers (and cleaned up all of the leaked oil on the
exhaust side and in the spark plug valley). Recently replaced the TPS
sensor.

http://www.cardomain.com/ride/2244879/3 for some old engine bay photos

Thanks for looking and feel free to make offers.  I will repost with
more pictures and obo prices hopefully before next weekend (currently
staying in a hotel near Detroit, MI while working with a client this
week).

Cheers,
Mike, 87T