[Supras] Undersize bearings

[suprra girl]

Not sure if you can get acl over there but i believe acl is an australasian
company, we get acl here and in aussie... awesome product tho :)
You can get varied sizes from them... i've got .25's in my engine at the mo
but can go larger if need be but generally i'll replace the crank

--
Cheers

Suze
7M POWAH! ;)
www.supra.co.nz



On 10/18/07, Bill <bwright1818 at comcast.net> wrote:
>
> Hmmm, the plot thickens. All of you that suggested that the windage tray
> being ripped out of my oil pan might indicate that the engine was a rebuild,
> were right. It has under size bearings.
>
> My next stupid question is this: The Toyota manual only seems to mention
> one under size bearing: 0.25. My rod bearings have this number on them; so
> that's cool. They're about .010" under, which seems to concur. However, my
> main bearings have 0.5 on them, and sure enough, they measure in at about
> .020" undersize. They say "ACL" on them, which I assume is a brand? Where do
> you get these? Any NAPA store? It seems not to be Toyota, right?
>
> Thanks again,
> Bill 90 N/A
> _______________________________________________
> Supras mailing list
> Supras at supras.com
> http://supras.com/mailman/listinfo/supras_supras.com
>