[Supras] First startup!

[Jim Jobe]

Reset ECU and set ignition timing.  I disconnect my battery all the
time w/out problems.

On Wed, Oct 03, 2007 at 02:22:10AM -0400, berniek at technicaldevelop.com wrote:
> Finally got my JDM rebuild started in the '91T for the first time.  I 
> missed a heater hose at the rear of the block, so had to take off the 
> EGR to get to it, what a PITA.
> 
> Initial Lex AFM and fuel pressure settings would be appreciated to just 
> get it going (550 cc Greddy injectors installed)..  I only ran it for 
> about 3-5 minutes since its late, but it seemed to want high fuel 
> pressure (almost 50 PSI referred to atmosphere)  to idle with the AFM 
> bypass almost completely closed.  Even then the idle would would not be 
> stable, hunting quickly around 600 RPM and then stalling (did not appear 
> to be related to 1500 RPM fuel cutoff).  Tip-in was awful as well.  The 
> car is up on stands, so has not been moved yet.  I swapped engines with 
> the battery connected, securely taping up the alternator and starter 
> connectors, so as not to get into airbag problems.  So I have not reset 
> the ECU.  The spark sounds a little retarded, but it can't be by much. 
> 
>   So, suggestions for startup fuel and Lex bypass setting would be much 
> appreciated.
> 
>     Thanks.
> 
>        BernieK