[Supras] Soldering hose retaining rings on Mandrelbends tubing for hardpipes

[Jim Jobe]

Ever thought about taking the pipes to the nearest muffler shop
to have a bead welded on each end?  They shouldn't want more than
about $10 to do it and it would take considerably less time/effort.
If you're lucky you might even find a fabrication shop with a
tubing bead roller.

On Thu, Nov 29, 2007 at 01:19:08AM -0500, berniek at technicaldevelop.com wrote:
> The only information I was able to find from the manufacturer was the 
> steel company that they buy the pipe from and the fact that the 
> aluminization is between .00025" and ,0015" thick.  Tonight, I ground 
> off  the aluminizing and found the following: