[Supras] 89: Window switch schematics or repair needed

Bob bob at hairballcreations.com
Tue Nov 20 12:36:34 CST 2007


Someone else gave you a link... I assume it is right...

Actually I have seen a lot more problems with the wires that the switch.

The switches I have seen bad had physically broken parts

Bob

-----Original Message-----
From: metlar at juno.com [mailto:metlar at juno.com] 
Sent: Monday, November 19, 2007 9:26 PM
To: bob at hairballcreations.com
Cc: metlar at juno.com; supras at supras.com
Subject: RE: [Supras] 89: Window switch schematics or repair needed

Hi Bob,

Thanks for the reply, what I am looking for is something like this

http://www.clarks-garage.com/shop-manual/elect-20.htm

Where instead of a Porsche 944 switch shown, it would be a Supra switch
taken completely apart. Sort of what is going on at the bottom of that above
link's page. 

Figured I should clean the switch 1st before the wire test. Right? 

Thanks in advance to all!



-- "Bob" <bob at hairballcreations.com> wrote:
I can get you the wiring diagram but it is on line here...

http://www.cygnusx1.net/Supra/Library/TSRM/MK3/default.aspx

And a lot faster to find stuff

Most of the time the problem is caused by a broken wire in the harness going
from the door to the body.  

Almost always on the drivers side.

Look there first before taking apart the switch... Oh wait, I should have
told you this yesterday

Bob




-----Original Message-----
From: supras-bounces at supras.com [mailto:supras-bounces at supras.com] On Behalf
Of metlar at juno.com
Sent: Monday, November 19, 2007 7:19 PM
To: Supras at supras.com
Subject: [Supras] 89: Window switch schematics or repair needed

So I have a 89 whose window on the driver's side like to work ok, the
passenger one does not(it moves the window up fine, and rarely does it like
to push the window back up), the pass side single switch doesn't work at
all. 

Got a used switch and decided to take it apart and clean up the contacts,
but while putting it back together, some things I have no clue where they
go(the spring w/ a L shape and those white plastic pieces that go under the
driver's side switch). 

Does anyone have pictures of these broken down? A website showing this
perhaps? Or as a last ditch, does anyone want to put this back together,
test it and make sure the contacts are in fact clean and working well? I'll
of course pay for shipping both ways and something else too. 


Thanks!
Tom
metlar at juno.com
_____________________________________________________________
Click here for huge discounts on tradeshow supplies.
http://thirdpartyoffers.juno.com/TGL2111/fc/Ioyw6iifXE0i3484dRx1toPihDewurRz
GVFecvPyTMTEhnMEHdm4LA/



_______________________________________________
Supras mailing list
Supras at supras.com
http://supras.com/mailman/listinfo/supras_supras.com


-- 
No virus found in this incoming message.
Checked by AVG Free Edition. 
Version: 7.5.503 / Virus Database: 269.16.0/1137 - Release Date: 11/18/2007
5:15 PM

_____________________________________________________________
Learn to trade with confidence! Online Stock Trading. Click Now!
http://thirdpartyoffers.juno.com/TGL2111/fc/Ioyw6iiejkViaxBdNMuj1EfBlOvuMMBe
BXuDIsSSPZUwrnc0B8gn7o/




-- 
No virus found in this incoming message.
Checked by AVG Free Edition. 
Version: 7.5.503 / Virus Database: 269.16.0/1137 - Release Date: 11/18/2007
5:15 PM





More information about the Supras mailing list