[Supras] 89: Window switch schematics or repair needed

Keith DiSarno kdisarno at gmail.com
Tue Nov 20 09:41:09 CST 2007


This might be more helpful...

http://www.cygnusx1.net/Supra/Library/TEWD/MK3/manual.aspx?S=Main&P=094

Keith

On Nov 19, 2007 8:25 PM, metlar at juno.com <metlar at juno.com> wrote:
> Hi Bob,
>
> Thanks for the reply, what I am looking for is something like this
>
> http://www.clarks-garage.com/shop-manual/elect-20.htm
>
> Where instead of a Porsche 944 switch shown, it would be a Supra switch taken completely apart. Sort of what is going on at the bottom of that above link's page.
>
> Figured I should clean the switch 1st before the wire test. Right?
>
> Thanks in advance to all!
>
>
>
>
> -- "Bob" <bob at hairballcreations.com> wrote:
> I can get you the wiring diagram but it is on line here...
>
> http://www.cygnusx1.net/Supra/Library/TSRM/MK3/default.aspx
>
> And a lot faster to find stuff
>
> Most of the time the problem is caused by a broken wire in the harness going
> from the door to the body.
>
> Almost always on the drivers side.
>
> Look there first before taking apart the switch... Oh wait, I should have
> told you this yesterday
>
> Bob
>
>
>
>
> -----Original Message-----
> From: supras-bounces at supras.com [mailto:supras-bounces at supras.com] On Behalf
> Of metlar at juno.com
> Sent: Monday, November 19, 2007 7:19 PM
> To: Supras at supras.com
> Subject: [Supras] 89: Window switch schematics or repair needed
>
> So I have a 89 whose window on the driver's side like to work ok, the
> passenger one does not(it moves the window up fine, and rarely does it like
> to push the window back up), the pass side single switch doesn't work at
> all.
>
> Got a used switch and decided to take it apart and clean up the contacts,
> but while putting it back together, some things I have no clue where they
> go(the spring w/ a L shape and those white plastic pieces that go under the
> driver's side switch).
>
> Does anyone have pictures of these broken down? A website showing this
> perhaps? Or as a last ditch, does anyone want to put this back together,
> test it and make sure the contacts are in fact clean and working well? I'll
> of course pay for shipping both ways and something else too.
>
>
> Thanks!
> Tom
> metlar at juno.com
> _____________________________________________________________
> Click here for huge discounts on tradeshow supplies.
> http://thirdpartyoffers.juno.com/TGL2111/fc/Ioyw6iifXE0i3484dRx1toPihDewurRz
> GVFecvPyTMTEhnMEHdm4LA/
>
>
>
> _______________________________________________
> Supras mailing list
> Supras at supras.com
> http://supras.com/mailman/listinfo/supras_supras.com
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.503 / Virus Database: 269.16.0/1137 - Release Date: 11/18/2007
> 5:15 PM
>
> _____________________________________________________________
> Learn to trade with confidence! Online Stock Trading. Click Now!
> http://thirdpartyoffers.juno.com/TGL2111/fc/Ioyw6iiejkViaxBdNMuj1EfBlOvuMMBeBXuDIsSSPZUwrnc0B8gn7o/
>
>
>
>
> _______________________________________________
> Supras mailing list
> Supras at supras.com
> http://supras.com/mailman/listinfo/supras_supras.com
>



More information about the Supras mailing list