[Supras] Cleaning garage

Mike Long mike at milisake.com
Wed Nov 14 22:32:14 CST 2007


Finally got pictures for everything plus labeled with prices.  If
anyone believes I am too high on anything, feel free to suggest a
price, everything is obo and I want to get it all moved out of the
garage to make room for the 1UZ swap project.

1 - alternator, unknown condition ($20 obo)
1 - upper intake manifold, just the manifold nothing else - $25 obo
(UIM and LIM for $50)
1 - lower intake manifold, just the manifold nothing else - $25 obo
(UIM and LIM for $50)
1 - fuel rail - $10 obo , or free with UIM and LIM
1 - set of 7M-GTE valve covers - $15 obo
http://picasaweb.google.com/milisakeracing/SupraPartsForSale

1 - clean 7M-GTE block with main caps. Block has been cleaned, honed,
and painted red, unknown mileage, although it will need another light
hone since it has sat in the garage now for ~6 months.  I will have a
video short uploaded soon showing the deck and cylinders a little
closer - $100 obo
http://picasaweb.google.com/milisakeracing/SupraEngine for pics

1 - 7M-GTE head, unknown mileage. I believe I have all of the valves,
shims, cam caps, etc…some were taken out before I picked up the head
and put in a small tool box. - $150 obo
http://picasaweb.google.com/milisakeracing/SupraEngine for pics

1 - set of 7M-GTE cams - $50 obo, free with purchase of the cylinder head
1 - misc. brackets - $15 obo
2 - turbo elbows - $10 each obo
1 - CT26 - needs rebuild, enough play that the compressor wheel hits
the housing or comes pretty darn close - $50 obo
http://picasaweb.google.com/milisakeracing/SupraEngine for pics

1- oil supply/return tubes - $10 obo

3 - 17×7 Kosei Racing Seneca wheels. Cast, light weight, 7-spoke alloy
wheel, +35 offset with two bolt patterns, one of which is 5×114.3mm
(4.5″). I have three, two of which have some rash and could use some
cleaning as well. Original price: $236 per wheel. I'll take $150 for
all three, obo.

2 - 16×7.5 Moda Radius R1 wheels. Light weight, 5-spoke wheels, +45
offset w/5×114.3mm (4.5″) bolt pattern. Little bit of rash as well.
Looking for $100 obo for the pair, obo.
http://picasaweb.google.com/milisakeracing/KoseiAndModaWheels for pics

2 - pairs of winter tires
a. 2xYokohama IceGuards, 205/55R16
b. 2xYokohama IceGuards, 215/45R17

Both sets have lots of tread left as seen in the pictures. Would like
$75 obo for each pair.
http://picasaweb.google.com/milisakeracing/YokohamaIceGuards for pics

1 - running 7M-GTE engine, unknown mileage, still in my car at the
moment if anyone is close enough to take it for a test drive (and help
pull it…). Should be ready to pull in two-three more weeks. Will not
include the PS pump & reservoir, A/C compressor, ECU, or engine/engine
bay wiring harnesses (engine will have harness stripped off carefully
to avoid cracking too many connectors)

Shortly after purchasing the car, I replaced the CT26 turbo with a
used one with less shaft play plus all gaskets involved with the
replacement (both sides of turbo elbow, O2, turbo-to-manifold,
manifold-to-block, oil supply/return line), replaced IC pipes from
turbo to IC with hard pipes, replace exhaust manifold due to a crack
and helicoiled the head (replaced with new studs as well), and
replaced valve cover gaskets and valve cover screws with SS hex bolts
and star locking washers (and cleaned up all of the leaked oil on the
exhaust side and in the spark plug valley). Recently replaced the TPS
sensor.

$500 obo and I'll even throw in the IC and IC plumbing.

http://www.cardomain.com/ride/2244879/3 for some old engine bay photos

Thanks for looking and feel free to make offers. Shipping is not
included in any of the prices. Pictures of items where I have not
specifically linked to may be seen here:

http://picasaweb.google.com/milisakeracing/SupraPartsForSale

Cheers,
Mike, 87T



More information about the Supras mailing list