[Supras] Spring removal from shock problems?

[Hacker J]

Cut a slot in the top of the shaft and jury rig a tool to keep it from rotating.

Jon
90T

----- Original Message ----

 This may end up being an option but I'm not sure as I don't want to
damage the threads. My main concern is the shocks as they'll be rebuilt
and reused after removing the springs. They are a c-clip style, too bad
I can't make a tool to fit a lower grove and compress the sprig/perch
from the bottom enough to remove the clip, then the springs could come
off from the bottom.

-----Original Message-----
From: Bob Shapton [mailto:bshap at tonedeaf.com] 
Sent: Monday, November 05, 2007 10:34 AM
To: Walker, Brian (Rich. Dist); supras-bounces at supras.com
Subject: Re: [Supras] Spring removal from shock problems?

If you can get a die grinder or Dremel tool in there you can cut the
nuts off.

Bob







__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com