[Supras] HELP!

[Jeff]

Replaced the master and slave clutch cyl's on my 91 turbo yesterday. Got brand new parts from Jeff Watson. All went well - drove it for ~ 90 miles. Went tot he store today and when I came out I had no clutch pedal. Checked the fluid level - appeared OK but when my son worked the pedal by hand I noticed the fluid going down. Had the car flat bedded home - took off the slave and the housing (bell) that the slave mounts to was full of pressurized brake fluid. When I pulled out the slave the boot and push rod were off the cyl and the plunger was 1/4 inch past the end of the cyl housing. 

Is there anything I could have done to cause this? Any adjustments I didn't do? Any suggestions?

I'm stuck here.

Thanks
Jeff