[Supras] 1 piece driveshafts??

[Jeff Mohler]

I sold dozens of those things when I lived in Tulsa...they work fantastic.

I'll get one for my 87T "Forever Project" this summer im sure.

Just gotta get the details worked out..like..make the headlights work.

On 3/18/07, Steve Michael <azsuprasm at qwest.net> wrote:
>
> I've been driving my 90T with a built Auto tranny for awhile with the 1pc
> Alum. driveshaft. I got mine from Mike D. over at SupraCentral.
>
> He was nice enough, but I originally got the shorter 5spd version...and it
> took forever to get the replacement for the AT.
> See if you can find one from another Supra owner here on the list first,
> then check your local driveshaft places to see if you can't get one built
> locally. Anyone else (the vendors here) you'll buy them from will all get
> them made somewhere else. Expect to pay $350-450 that way.
>
> No problems with the Al shaft at all, and I love chirpin' the wheels when
> I
> hit 2nd or 3rd at boost.
>
> Steve in AZ...90T for Me!
>
> > Date: Fri, 16 Mar 2007 15:40:45 -0400
> > From: "Walker, Brian1 \(Rich. Dist\)"
> > <Brian.Walker2 at VDOT.Virginia.gov>
> > Subject: [Supras] 1 piece driveshafts??
> > To: <supras at supras.com>
> > Message-ID:
> > <648BDB3AA3B1FE4C8C67D8F7642F6EBE44857B at 501EXRI01.virginiadot.org>
> > Content-Type: text/plain; charset="iso-8859-1"
> >
> > Does anyone have experience with the 1 piece driveshafts available for
> the
> > mk3? I've seen the 'Jaws Gear' shaft and the 'Driveshaft Shop' both
> > offered in Steel and Al. I had read a while back that a problem with an
> > Al. driveshaft is that it does not dampen vibration as well as a stock
> > shaft. (I'm guessing this is because the stocker's rear section is 2
> piece
> > with rubber isolation) Can anyone confirm whether a 1 piece steel shaft
> > dampens any better than an Al. one? I realize a carbon shaft would
> dampen
> > better than both but I don't have the funds to go with that option.
> >
> > Thanks,
> > Brian
> >
> > the 'Jaws Gear' shaft and the 'Driveshaft Shop' both offered
> > in Steel and Al. I had read a while back that a problem with an Al.
> > driveshaft is that it does not dampen vibration as well as a stock
> shaft.
> > (I'm guessing this is because the stocker's rear section is 2 piece with
> > rubber isolation) Can anyone confirm whether a 1 piece steel shaft
> dampens
> > any better than an Al. one? I realize a carbon shaft would dampen better
> > than both but I don't have the funds to go with that option.
> >
> > Thanks,
> > Brian
> >
>
>
>
> _______________________________________________
> Supras mailing list
> Supras at supras.com
> http://supras.com/mailman/listinfo/supras_supras.com
>