[Supras] MKIII Starting issues

[Michael Bringle]

Hey larry.  If you don't even hear the solenoid click it's not near the
starter.  Here is the wiring diagram:
www.cygnusx1.net/Supra/Library/TEWD/MK3/manual.aspx?Section=Main&Page=038

The best bet is next time it happens, get a volt meter and "look" for the
open circuit.

-Mike

-----Original Message-----
From: supras-bounces at supras.com [mailto:supras-bounces at supras.com] On Behalf
Of Larry B
Sent: Thursday, June 21, 2007 7:28 PM
To: supras at supras.com
Subject: [Supras] MKIII Starting issues

When I turn the key, nothing happens except for a voltage drop. The solinoid

does not click. Starter and solinoid are a year old. I tried bypassing the 
keyswitch with 12 volts to the soliniod and no change. I can see the clutch 
safety switch is working because the voltage drop does not happen unless the

switch is depressed. I had a tech look at it and it started working again 
after he touched the solinoid switch with a probe. He suggested it might be 
an issue with the alarm?? or the key switch. How does the alarm work with 
the start cut? What about the relay for the starter, is that known to have 
issues?
Thanks for your response.

Larry B

_________________________________________________________________
Need a break? Find your escape route with Live Search Maps. 
http://maps.live.com/default.aspx?ss=Restaurants~Hotels~Amusement%20Park&cp=
33.832922~-117.915659&style=r&lvl=13&tilt=-90&dir=0&alt=-1000&scene=1118863&
encType=1&FORM=MGAC01


_______________________________________________
Supras mailing list
Supras at supras.com
http://supras.com/mailman/listinfo/supras_supras.com