[Supras] Sub Box for 89 Targa?
cthommes at adelphia.net
cthommes at adelphia.net
Thu Jun 14 16:12:04 CDT 2007
This is a much easier decision to make when you have brakes that don't fit under any spare wheel/tire you've been able to find that will fit the car... MK4 spare included.
-Craig
---- Dan Gyoba <dgyoba at abstractconsulting.com> wrote:
> The inclusion of a spare tire well sub box usually indicates that one is willing to live with a can of Fix-a-Flat or
> the auto club membership for "spare tire"
>
> Persoanlly, I'm not willing to work that way, but that's me. That's why my sub enclosure is mounted to the back of
> the rear seats. (I was going to have them take over the rear seats, but I haven't done that yet. I think if I
> built those, they'd still allow the targa to fit, no problem.
>
> On 12 Jun 2007 at 21:23, Steve Michael wrote:
>
> > Ventilation, Jeff? Also, where do you carry the spare? Or is it on a
> > AAA wallet card? :-)
> >
> > FWIW, I made a custom enclosure for my now upside-down mounted full
> > size spare with two Ultimate 6.5's run out of phase. I can't push them
> > too hard, but the sound is way clean.
> >
> > Steve in AZ...90T for me!
> >
> > SEE YOU IN VEGAS for SILV XI '07: THIS ONE GOES TO ELEVEN!
> >
> > From: "Jeff Mohler" <speedtoys.racing at gmail.com>
> > Subject: Re: [Supras] Sub Box for 89 Targa?
> > To: "Dan Gyoba" <dgyoba at abstractconsulting.com>
> > Cc: "metlar at juno.com" <metlar at juno.com>, Supras at supras.com
> > Message-ID:
> > <a969fbd10706121505j7da4f3fdua5a87785deda9989 at mail.gmail.com>
> > Content-Type: text/plain; charset=UTF-8; format=flowed
> >
> > Im building a 7 sided box of heavy MDF in the spare well, and the
> > AMP/power rack will be the spare tire cover that I laminated in FG,
> > then a layer of Carbon-Kevlar, then a gloss layer of poly resin (about
> > 1/8" thick).
> >
> > Above that on stands, will be a false floor that will look like an
> > empty hatch area if the targa was out..and that will also support a
> > load of groceries/etc without impacting the hardware.
> >
> > On 6/12/07, Dan Gyoba <dgyoba at abstractconsulting.com> wrote:
> > >
> > > On 12 Jun 2007 at 19:52, metlar at juno.com wrote:
> > >
> > > > Is anyone out there making sub boxes for the MKIII supra w/targa
> > > > top?
> >
> >
> >
> > _______________________________________________
> > Supras mailing list
> > Supras at supras.com
> > http://supras.com/mailman/listinfo/supras_supras.com
> >
>
> Dan Gyoba
> '89 NA 450,322 kms, Turbo swap in progress
> http://www.abstractconsulting.com/~dan
>
>
> _______________________________________________
> Supras mailing list
> Supras at supras.com
> http://supras.com/mailman/listinfo/supras_supras.com
More information about the Supras
mailing list