[Supras] Sub box for MkIII hatch w/Targa

Jeff Mohler speedtoys.racing at gmail.com
Thu Jun 14 03:10:29 CDT 2007


My amps are well sized for what I use em for, no overheat issues at all.

These used to be mounted upside down on a rack in the rear celing of my old
01 Jeep Gr. Cherokee, and some people on the list have seen/experienced that
before.

The alpine hardware I had up there and will have in the Sup..will never
overheat, its all oversized for clarity.

And..I havent had a Supra Id trust to drive to Vegas since..I dunno, 2001 or
so.   Why change now?  :)

On 6/13/07, Steve Michael <azsuprasm at qwest.net> wrote:
>
>  No, no not the sub enclosure you Lugnut!
>
> The amps are gonna need a little bit of airflow to keep them from heatin'
> up.
>
> ...and if your MkIII won't leave town, how will you get it to VEGAS for
> this year's festivities?
> (at least come for the poker tourney and the scenic drive, eh?)
>
> -=S=-
>
> ----- Original Message -----
> *From:* Jeff Mohler <speedtoys.racing at gmail.com>
> *To:* Steve Michael <azsuprasm at qwest.net>
> *Cc:* supras at supras.com
> *Sent:* Tuesday, June 12, 2007 9:28 PM
> *Subject:* Re: [Supras] Supras Digest, Vol 43, Issue 16
>
> Vent what..the box?  Sealed, 1.4Ft^3, and thats HARD in that well using
> 3/4" board.
>
> This car will never leave town..so it can go the AAA route.
>
> Besides, I have my own tow truck and trailer..honest.
>
> On 6/12/07, Steve Michael <azsuprasm at qwest.net> wrote:
> >
> > Ventilation, Jeff?  Also, where do you carry the spare? Or is it on a
> > AAA
> > wallet card? :-)
> >
> > FWIW, I made a custom enclosure for my now upside-down mounted full size
> > spare with two Ultimate 6.5's run out of phase.
> > I can't push them too hard, but the sound is way clean.
> >
> > Steve in AZ...90T for me!
> >
> > SEE YOU IN VEGAS for SILV XI '07: THIS ONE GOES TO ELEVEN!
> >
> > From: "Jeff Mohler" < speedtoys.racing at gmail.com>
> > Subject: Re: [Supras] Sub Box for 89 Targa?
> > To: "Dan Gyoba" <dgyoba at abstractconsulting.com>
> > Cc: " metlar at juno.com" <metlar at juno.com>, Supras at supras.com
> > Message-ID:
> > < a969fbd10706121505j7da4f3fdua5a87785deda9989 at mail.gmail.com>
> > Content-Type: text/plain; charset=UTF-8; format=flowed
> >
> > Im building a 7 sided box of heavy MDF in the spare well, and the
> > AMP/power
> > rack will be the spare tire cover that I laminated in FG, then a layer
> > of
> > Carbon-Kevlar, then a gloss layer of poly resin (about 1/8" thick).
> >
> > Above that on stands, will be a false floor that will look like an empty
> > hatch area if the targa was out..and that will also support a load of
> > groceries/etc without impacting the hardware.
> >
> > On 6/12/07, Dan Gyoba <dgyoba at abstractconsulting.com> wrote:
> > >
> > > On 12 Jun 2007 at 19:52, metlar at juno.com wrote:
> > >
> > > > Is anyone out there making sub boxes for the MKIII supra w/targa
> > top?
> >
> >
> >
> > _______________________________________________
> > Supras mailing list
> > Supras at supras.com
> > http://supras.com/mailman/listinfo/supras_supras.com
> >
>
>


More information about the Supras mailing list