[Supras] Supras Digest, Vol 43, Issue 16

[Jeff Mohler]

Vent what..the box?  Sealed, 1.4Ft^3, and thats HARD in that well using 3/4"
board.

This car will never leave town..so it can go the AAA route.

Besides, I have my own tow truck and trailer..honest.

On 6/12/07, Steve Michael <azsuprasm at qwest.net> wrote:
>
> Ventilation, Jeff?  Also, where do you carry the spare? Or is it on a AAA
> wallet card? :-)
>
> FWIW, I made a custom enclosure for my now upside-down mounted full size
> spare with two Ultimate 6.5's run out of phase.
> I can't push them too hard, but the sound is way clean.
>
> Steve in AZ...90T for me!
>
> SEE YOU IN VEGAS for SILV XI '07: THIS ONE GOES TO ELEVEN!
>
> From: "Jeff Mohler" <speedtoys.racing at gmail.com>
> Subject: Re: [Supras] Sub Box for 89 Targa?
> To: "Dan Gyoba" <dgyoba at abstractconsulting.com>
> Cc: "metlar at juno.com" <metlar at juno.com>, Supras at supras.com
> Message-ID:
> <a969fbd10706121505j7da4f3fdua5a87785deda9989 at mail.gmail.com>
> Content-Type: text/plain; charset=UTF-8; format=flowed
>
> Im building a 7 sided box of heavy MDF in the spare well, and the
> AMP/power
> rack will be the spare tire cover that I laminated in FG, then a layer of
> Carbon-Kevlar, then a gloss layer of poly resin (about 1/8" thick).
>
> Above that on stands, will be a false floor that will look like an empty
> hatch area if the targa was out..and that will also support a load of
> groceries/etc without impacting the hardware.
>
> On 6/12/07, Dan Gyoba <dgyoba at abstractconsulting.com> wrote:
> >
> > On 12 Jun 2007 at 19:52, metlar at juno.com wrote:
> >
> > > Is anyone out there making sub boxes for the MKIII supra w/targa top?
>
>
>
> _______________________________________________
> Supras mailing list
> Supras at supras.com
> http://supras.com/mailman/listinfo/supras_supras.com
>