[Supras] HKS-VPC/Maft

[cthommes at adelphia.net]

I could have said no, but then what would I spend the next two years bitching about?

Fade must have been due to installer error...

-Craig

---- Jim Jobe <jjobe2 at supratech.org> wrote: 
> 
> You had every right to say "NO" to that deal.
> 
> If it makes you feel any better, I didn't feel even the least bit
> guilty as I was installing them.  And I shook my fist at you
> when they faded.  "d at mn you thomm- at ss!!"
> 
> On Tue, Jul 31, 2007 at 09:55:00AM -0700, cthommes at adelphia.net wrote:
> > Yeah, you wouldn't have sold it for $90 if the brakes transaction had happened first.   Punk.
> > 
> > -Craig
> > 
> > ---- Jim Jobe <jjobe2 at supratech.org> wrote: 
> > > 
> > > IMO it's best to sell the FIPK and get a universal cone
> > > filter that fits whatever size pipe or sensor you're going
> > > to use.  I think I sold my FIPK for $90.  The K&N cones go for
> > > 30-40 last I checked.
> > > 
> > > I plan to get some high temp ABS plastic and build a divider wall
> > > that is pretty much in line with the frame rail, then turn towards
> > > the fender just behind the filter.  I may use rubber weather stripping
> > > on the edges to help seal the area off.  Anything will help however -
> > > my air filter is usually around 135F thanks to all of the heat
> > > coming off the radiator.  I just don't think fitting a 4" pipe through
> > > the front of the engine bay will work.
> > > 
> > > On Tue, Jul 31, 2007 at 08:39:41AM -0400, Walker, Brian (Rich. Dist) wrote:
> > > > I'd like to see/hear the project to as I've been wanting to do a CAI
> > > > setup for a while. I've had an untuned MAFT in for a while now, just
> > > > waiting to have time to setup the speed/density portion of it. I'd like
> > > > to see what yall are doing for piping from turbo to duct or beyond the
> > > > engine bay. Did you have to get a new filter or could the FIPK be
> > > > reused?
> > > > 
> > > > 
> > > > From: "Rockey Fox" 
> > > >   <supr91tt at yahoo.com>
> > > > To: "Michael Green" 
> > > >   <mikejaygreen at hotmail.com>; 
> > > >   <sprigmo1 at yahoo.com>;
> > > > <supras at supras.com>
> > > > Sent: Monday, July 
> > > >   30, 2007 1:23 PM
> > > > Subject: Re: [Supras] HKS-VPC/Maft
> > > > 
> > > > 
> > > > > Mike, 
> > > >   have you devised a cold air intake setup yet? I'm on the verge of
> > > > buying 
> > > >   the MAFT-Pro myself and just thinking through the additional stuff
> > > > I'll 
> > > >   need like the air intake snorkel.
> > > > >
> > > > > Rockey 91T
> > > > 
> > > > 
> > > > _______________________________________________
> > > > Supras mailing list
> > > > Supras at supras.com
> > > > http://supras.com/mailman/listinfo/supras_supras.com
> > > 
> > > _______________________________________________
> > > Supras mailing list
> > > Supras at supras.com
> > > http://supras.com/mailman/listinfo/supras_supras.com