[Supras] eagle rods

[Howard Hutchinson]

I believe the sets of Crower rods that I have also lacks these oiling ports.  

Dave Henry <daveh at to4r.com> wrote:  I noticed the same thing when I got a set of carrillo's. I thought it was a 
mfg error at first and called carrillo on it and yes, the bearings are fed 
through the crank and those holes are not necessary. I think all the holes 
on the oem pistons are for is to allow oil to escape upward and get the 
bottom of the piston? Someone correct me if I'm wrong.

DaveH


----- Original Message ----- 
From: "Peter" 

To: "Peter" 
; 
Sent: Friday, July 13, 2007 10:08 PM
Subject: Re: [Supras] eagle rods


> In response to my own question and please correct me if I am wrong. Oil is
> fed through the crank and to the bearings so no hole will help in oiling.
> After thinking some more this makes sense.
>
> ----- Original Message ----- 
> From: "Peter" 

> To: 
> Sent: Friday, July 13, 2007 11:00 PM
> Subject: [Supras] eagle rods
>
>
>> has anyone else here who used the eagle rods for the 7m noticed that they
>> dont have an oil feed hole to the rod bearings?
>> is it suppose to be this way, seems wrong to me, i wonder if I got the
>> wrong parts.
>> _______________________________________________
>> Supras mailing list
>> Supras at supras.com
>> http://supras.com/mailman/listinfo/supras_supras.com
>>
>>
>> -- 
>> No virus found in this incoming message.
>> Checked by AVG Free Edition.
>> Version: 7.5.476 / Virus Database: 269.10.5/899 - Release Date: 7/13/2007
>> 3:41 PM
>>
>>
>
>
> _______________________________________________
> Supras mailing list
> Supras at supras.com
> http://supras.com/mailman/listinfo/supras_supras.com
> 


_______________________________________________
Supras mailing list
Supras at supras.com
http://supras.com/mailman/listinfo/supras_supras.com