[Supras] water lines for turbo

[Sean Cavanaugh]

that's the fitting I have now and its not matching up with the thread pitch 
of the bolt that was plugging it or with the actual hole. can only get about 
2 threads in before it stops. I might just have to tapthe threads to accept 
the fitting.

----- Original Message -----
From: "Craig Thommes" <cthommes at adelphia.net>
To: "'Sean Cavanaugh'" <Millenia2000 at hotmail.com>; <Supras at supras.com>
Sent: Saturday, July 14, 2007 8:57 PM
Subject: RE: [Supras] water lines for turbo

> Yup, everyone will try and tell you it's a metric thread like an M14x1.5 
> or
> something.  Nuh-uh, it's 1/4" BSPT.  The adapter to -6 is out there, but
> it's not the most common thing in the world.  I found one online, but I
> can't remember where.
>
> -Craig
>
> -----Original Message-----
> From: supras-bounces at supras.com [mailto:supras-bounces at supras.com] On 
> Behalf
> Of Sean Cavanaugh
> Sent: Saturday, July 14, 2007 2:22 PM
> To: Supras at supras.com
> Subject: [Supras] water lines for turbo
>
> I just got my upgraded turbo back and I have to reattach the waterlines 
> that
> the previous turbo didn't use. prev owner had just sealed the locations 
> with
> bolts. my new water line kit is really nice AN kit. the elbow connector 
> they
> gave for screwing into the thermostat housing is the wrong size. does 
> anyone
> know what the proper size to screw into this? I have to order a 
> replacement.
>
> the one they gave for the lower line was the correct size so no issue 
> there.
>
>
> -Sean
> _______________________________________________
> Supras mailing list
> Supras at supras.com
> http://supras.com/mailman/listinfo/supras_supras.com
>
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.476 / Virus Database: 269.10.5/899 - Release Date: 7/13/2007
> 3:41 PM
>
>
>