[Supras] SS Brake Lines Question

[Hacker J]

When I installed my Goodrich lines I followed the original path including the sharp bend. My main worry was not the bend, but rubbing against the back of the hub. I adjusted the loop size to keep it as far as possible from the hub. I recently inspected it after 6 months and everything looked fine.

Jon
90T


----- Original Message ----




Hello all, I'm installing new calipers and SS break lines.  The fronts are a
bit weird.  I am wondering if they should be routed like the stock lines.
The stock lines are many piece and take a sharp bend right before they enter
the caliper:
http://www.cygnusx1.net/Supra/gallery/frontwheel_back_h.jpg

But the SS lines I got, Porterfield, are a single piece and I don't know if
that much of a curve is good for them.  Anyone install something like these
and did you use the stock routing?  Thanks

-Mike
89T BST++
http://www.CygnusX1.net/Supra





_______________________________________________
Supras mailing list
Supras at supras.com
http://supras.com/mailman/listinfo/supras_supras.com





 
____________________________________________________________________________________
Yahoo! Music Unlimited
Access over 1 million songs.
http://music.yahoo.com/unlimited