[Supras] front lower ball joint replacement

[Kofi Anim-Appiah]

Just like Jon said....this is not a very difficult job. I did not use a
puller to get the ball joint out of the spindle but rather, more delicately,
a few authoritative whacks with a hammer on a fork (separator)! I ruined the
rubber boots of course but didn't care.

- Kofi

Ex 86.5NA



On 1/4/07, tom <tomhwells at cox.net> wrote:
>
> I have to replace both front lower ball joints.  The TSRM method requires
> nearly complete disassembly of the front suspension.  Is there a simpler
> way- just unbolt the ball joint?  There is real danger of shipwright's
> disease here.
>
> Tom 87NA-T
> _______________________________________________
> Supras mailing list
> Supras at supras.com
> http://supras.com/mailman/listinfo/supras_supras.com
>