[Supras] MKIV front brake conversion on eBay
cthommes at adelphia.net
cthommes at adelphia.net
Mon Feb 26 12:25:49 CST 2007
Oh man, you're considering that e-bay mk4 brake setup now???
-Craig
---- Jim Jobe <jjobe2 at supratech.org> wrote:
>
> It is WELL known that the mk4 knuckles on the mk3 will throw
> caster and camber out so much it cannot be adjusted back in to spec.
> I also seem to recall it placed the wheel off center in the wheel
> well (probably why caster is off).
>
> On Mon, Feb 26, 2007 at 08:45:55AM -0500, Walker, Brian1 (Rich. Dist) wrote:
> > Where are the dust shields? I'd like to hear more on this, it makes sense
> > the upper/lower ball joints would fit since I've been told Toyota uses a
> > proprietary taper so I'd assume it's the same for most of their applications
> > but how different is the geometry? I wonder if you'd be able to get the
> > alignment to an acceptable range with the different knuckle? They also look
> > a far amount smaller than the stockers so they're probably a bit lighter but
> > I don't know why the tie rod ends wouldn't work (maybe different angle on
> > the mk4?)
> >
> > Those pads alone sell for over $200 but I can't imagine ever setting all
> > that up to where it works and not using it. It's a great alternative if you
> > could get it to work without binding and get the alignment dialed in.
> > Just my $.02.
> > Brian W-88T
> >
> >
> > Message: 1
> > Date: Sat, 24 Feb 2007 15:55:44 -0500
> > From: "Ken" <myblinkie1 at bellsouth.net>
> > Subject: [Supras] MKIV front brake conversion on eBay
> > To: "Supra List" <supras at supras.com>
> > Message-ID: <017201c75856$273b06c0$030aa8c0 at creekgov.local>
> > Content-Type: text/plain; charset="iso-8859-1"
> >
> > http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=015&sspagename=S
> > TRK%3AMEWA%3AIT&viewitem=&item=250087348596&rd=1&rd=1
> >
> > Apparently it is possible to do this swap of the whole hub & caliper? I can
> > 't imagine it would be too easy considering he mentions having to alter the
> > length of the tie rods...
> >
> > Any input?
> >
> > Ken
> >
> >
> > _______________________________________________
> > Supras mailing list
> > Supras at supras.com
> > http://supras.com/mailman/listinfo/supras_supras.com
>
> _______________________________________________
> Supras mailing list
> Supras at supras.com
> http://supras.com/mailman/listinfo/supras_supras.com
More information about the Supras
mailing list