[Supras] MHG's

[berniek at technicaldevelop.com]

Nick and group:

    I'm using a 2 mm gasket due to the amount of material taken off the
block and head to clean them up.

    Bernie


----- Original Message ----- 
From: "t72pwrd" <nholden1 at woh.rr.com>
To: <Bigmacz28 at aol.com>; <berniek at technicaldevelop.com>;
<SPOOLED91T at aol.com>; <Supras at supras.com>; <supr91tt at yahoo.com>
Sent: Tuesday, February 13, 2007 8:08 PM
Subject: Re: [Supras] MHG's


> Carbon build up.
>
> -Nick
>
> ----- Original Message ----- 
> From: <Bigmacz28 at aol.com>
> To: <berniek at technicaldevelop.com>; <SPOOLED91T at aol.com>;
> <Supras at supras.com>; <supr91tt at yahoo.com>
> Sent: Tuesday, February 13, 2007 7:21 PM
> Subject: Re: [Supras] MHG's
>
>
> > BernieK, are you using the 2.0mm also or some other side?
> >
> > Question Group: I got a JDM 7MGE and checked the compression with two
> > different gauges.
> >
> > Both are reading 198 to 200PSI on every cylinder. What could be causing
> > this?
> > The spec is around 150PSI.
> >
> > Any idea's?
> >
> > Joe Mac
> > 89N/A
> > _______________________________________________
> > Supras mailing list
> > Supras at supras.com
> > http://supras.com/mailman/listinfo/supras_supras.com
>
>
>