[Supras] Need CT-26 core and modifier recommendation

[Rich Peacock]

I've met Jon (MDC) personally and he does good work... BUT...  I would 
recommend calling Jeff Tamulis -> who then out sources to Jon (MDC).  
Jon is not the easiest guy to get a hold of and while Jeff is.  Jeff and 
Jon both communicate regularly.  Jon will probably take longer to turn 
around, sometimes several weeks longer, to get a turbo back to you which 
is why I recommend using Jeff as a point of contact.  Jeff can be 
contacted through www.notrice.com.  I'm currently testing turbos for them.

PT will be cheaper and faster.  While this is usually not considered 
good, I've run at least 4 PT turbos on various cars and not had a 
problem.   For me, shipping to CA verses Indiana was expensive.
-Rich

t72pwrd wrote:
> I used Turbonetics many years back:  http://64.225.76.178/main.htm (note 
> they're Performance Techniques not the realTurbonetics).  I was as pleased 
> as possible with their service, product and delivery.  Turbo did NOT crap 
> out or burn oil while I used it.  The other option, IMHO is Jon ar MDC: 
> http://www.mdcmotorsports.com/mdc%20front%20page.htm  No personal 
> experience, but the guy seems to do what he says and stand by his work.
>
>
> I'd go bigger Bernie;-)
>
> Use the dark side!
>
>
> ----- Original Message ----- 
> From: <berniek at technicaldevelop.com>
> To: <Supras at supras.com>
> Sent: Friday, February 02, 2007 7:31 PM
> Subject: [Supras] Need CT-26 core and modifier recommendation
>
>
>   
>> In the JDM rebuild I'm doing, I've decided on a mild 50 trim compressor 
>> upgrade.  I'll be running 15-16 PSI maximum for a daily driver.  If anyone 
>> has a rebuildable CT-26 core, please let me know.  As long as the shaft is 
>> straight and there are no cracks or turbine wheel damage it should be OK. 
>> Loose bearings or worn seals are not a problem according to most 
>> upgraders/rebuilders I've spoken with.
>>
>> There were quite a few posts several weeks ago about failure of rebuilt 
>> turbos.  Anyone have any idea of good rebuilder?
>>
>> Thanks.
>>
>>        BernieK
>> _______________________________________________
>> Supras mailing list
>> Supras at supras.com
>> http://supras.com/mailman/listinfo/supras_supras.com 
>>     
>
>
> _______________________________________________
> Supras mailing list
> Supras at supras.com
> http://supras.com/mailman/listinfo/supras_supras.com
>
>
>