[Supras] felpro head gaskets

[Hacker J]

Its one of the great mysteries of the 7M.  If you put your gasket on the head, you will see that it aligns perfectly to the intake side coolant holes.  However, the single narrower hole in the block does not match to the gasket or the head!

Jon
90T



----- Original Message ----

It's actually the same gasket as stock Toyota, and the stock Toyota gaskets 
do the same thing the original guy was questioning.  It's nothing to be 
concerned with.


----- Original Message ----- 
From: "Bob Schultz" <bob_schultz at bellsouth.net>
To: "'Peter'" <psantos at cfl.rr.com>; <supras at supras.com>
Sent: Wednesday, April 25, 2007 8:50 AM
Subject: Re: [Supras] felpro head gaskets


> No, actually Felpro make a pretty good gasket.  I would email (or call 
> them,
> check the website). I would lean towards an application error
>
> Bob
>
> -----Original Message-----
> From: supras-bounces at supras.com [mailto:supras-bounces at supras.com] On 
> Behalf
> Of Peter
> Sent: Wednesday, April 25, 2007 3:36 AM
> To: supras at supras.com
> Subject: [Supras] felpro head gaskets
>
> Has it been generally noted that felpro gaskets seem to have a fitment
> issue?
> My current version on the water outlets on the intake side do not match
> well. The gasket covers at least 30% of the holes. I believe this
> contributed to my recent bhg episode. Im wondering if this is a incorrect
> part number or if its common?
> _______________________________________________





__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com