[Supras] Oil temp sensor location?

[Jeff Mohler]

Good one..forgot about that.

On 4/3/07, Supras Ireland Admin <admin at supras-ireland.net> wrote:
>
> Quick way of doing it, is having a sump drain plug drilled and tapped to
> accpet the sender/probe
>
>
>
> ----- Original Message -----
> From: "Jeff Mohler" <speedtoys.racing at gmail.com>
> To: "Walker2, Brian (Rich. Dist)" <Brian.Walker2 at vdot.virginia.gov>
> Cc: <supras at supras.com>
> Sent: Tuesday, April 03, 2007 9:17 PM
> Subject: Re: [Supras] Oil temp sensor location?
>
>
> > Relocation kit is the easiest way, if in a rebuild..add it to the pan
> for
> > accurate temps.
> >
> > Oil temps are indicative of bearing temps..and pan temps are the best
> place
> > to get those.
> >
> >
> >
> > On 4/3/07, Walker2, Brian (Rich. Dist) <Brian.Walker2 at vdot.virginia.gov>
> > wrote:
> > >
> > > I would imagine some of you are using an oil temp gauge. How have you
> > > connected the sensor? I saw a sandwhich plate at one time but it did
> not
> > > use the OEM filter and it seems like moving the filter further
> outboard
> > > from the block may make it even more difficult to access than it
> > > currently is.
> > >
> > > Do some of you use a relocation kit that has ports for the sensor?
> > >
> > > Thanks,
> > > Brian W
> > >
> > >
> > >
> > > _______________________________________________
> > > Supras mailing list
> > > Supras at supras.com
> > > http://supras.com/mailman/listinfo/supras_supras.com
> > >
> > _______________________________________________
> > Supras mailing list
> > Supras at supras.com
> > http://supras.com/mailman/listinfo/supras_supras.com
> >
> >
> >
> > --
> > No virus found in this incoming message.
> > Checked by AVG Free Edition.
> > Version: 7.5.446 / Virus Database: 268.18.25/744 - Release Date:
> 03/04/2007 05:32
> >
> >
>
>
> _______________________________________________
> Supras mailing list
> Supras at supras.com
> http://supras.com/mailman/listinfo/supras_supras.com
>