[Supras] 1987 NA BHG repair

[Jim Jobe]

10mm hex.  Sometimes called a GM brake tool.  Most of the auto
parts stores have them since it's so popular.  Buy two.

On Mon, Oct 23, 2006 at 09:16:57AM -0500, Jon wrote:
> Hey all;
> 
> I have an 87 NA.  I am trying to get the head gasket replaced, but have 
> a small problem.  I need the tool to take it off.  Looks like a 
> standard, but large hex wrench.  The book says it is an SST 
> 09043-38100.  I called my local Checker, but they were not sure what 
> that was.  I called the local Toyota dealer, and they told me to go to 
> Snap-On.  I could not find it there either. 
> 
> Does anyone know what size of hex bolt this is?  I would like to get the 
> head off today so that I can find out if it needs to be machined.  Also, 
> I was told that if I use the strait edge of a metal ruler to see if the 
> head is warped, that I would not really have to take it to be 
> tested/machined if the ruler shows it is true.  Can I do that, or is 
> that a bad idea? 
> 
> Sorry for all the silly questions.  I am relatively new to the whole 
> 'fix my own car' thing.  Having a lot of fun, but making a mess.  I need 
> to find a place to post some pics.  The engine is disgustingly dirty.  
> The valve caps were not tightened down, and there is oil all over the 
> side of the engine.  It has baked on, and thickened.  There is oil all 
> over the spark plugs too.
> 
> Anyway, thanks for any help. 
> 
> Jon
> 
> _______________________________________________
> Supras mailing list
> Supras at supras.com
> http://supras.com/mailman/listinfo/supras_supras.com