[Supras] Crankshaft Pulley Bolt

[Sean Cavanaugh]

get some DISPOSABLE bolts and attach to flywheel holder long enough to catch 
the engine stand bar. your going to use those to stop the crank from turning 
but the bolt WILL bend..recommend Grade 8 bolts. after that, use a breaker 
bar and some steel pipe extensions to make about a 6 foot long breaker bar. 
will pop with enough force...that's what I had to do.

-Sean

----- Original Message -----
From: "Chris Myers" <cmyers at crmindustries.com>
To: <supras at supras.com>
Sent: Saturday, November 11, 2006 8:26 PM
Subject: [Supras] Crankshaft Pulley Bolt

> Does anyone have any sure fire method for removing the crankshaft pulley
> bolt?  The engine is currently on a stand.  I'll take any and all
> suggestions.
>
>
>
> Thanks,
>
> Chris
>
> 87 NA
>
> _______________________________________________
> Supras mailing list
> Supras at supras.com
> http://supras.com/mailman/listinfo/supras_supras.com
>