[Supras] Checking LSD for proper operation...

[Brian Walker]

I've heard they don't hold up as well as the stock LSD's though. I'll
probably have some R's on the car next season so I'll need something
that can handle the grip.

-----Original Message-----
From: Jeff Mohler [mailto:speedtoys.racing at gmail.com] 
Sent: Monday, November 06, 2006 1:22 PM
To: Brian Walker
Cc: supras list
Subject: Re: [Supras] Checking LSD for proper operation...

Sounds like someone would like a nice upgrade to a torsen.  :)

On 11/6/06, Brian Walker <Brian.Walker at timmons.com> wrote:
> I'm trying to check the differential on my 88T for proper operation
> (suspect clutches may need replacement) From the TSRM, the only
mention
> I've found was to raise one wheel off of ground and ensure that the
> wheel rotates freely while the other rear wheel is still on the
ground.
> I've verified this but it doesn't verify what I'm looking for. Does
> anyone know of a way to check the LSD for proper slip torque? I have
> heard it should slip at a certain torque setting, does anyone know
what
> this might be?
>
>
>
> When both wheels are raised from the ground, the spin in the same
> direction, when I spin one quickly (by hand) the other spins at a
lower
> speed.
>
>
>
> Thanks for any help.
>
> Brian W-88T
>
>
>
>
>
>
>
> _______________________________________________
> Supras mailing list
> Supras at supras.com
> http://supras.com/mailman/listinfo/supras_supras.com
>