[Supras] Checking LSD for proper operation...

[Dave Henry]

I remember reading in the tsrm that the torque to turn one wheel while the 
other was on the ground was something in the ballpark of 40ft/lb?

Dave Henry
www.boostwerx.com
701-730-6313

----- Original Message ----- 
From: "Brian Walker" <Brian.Walker at timmons.com>
To: "supras list" <supras at supras.com>
Sent: Monday, November 06, 2006 11:40 AM
Subject: [Supras] Checking LSD for proper operation...


> I'm trying to check the differential on my 88T for proper operation
> (suspect clutches may need replacement) From the TSRM, the only mention
> I've found was to raise one wheel off of ground and ensure that the
> wheel rotates freely while the other rear wheel is still on the ground.
> I've verified this but it doesn't verify what I'm looking for. Does
> anyone know of a way to check the LSD for proper slip torque? I have
> heard it should slip at a certain torque setting, does anyone know what
> this might be?
>
>
>
> When both wheels are raised from the ground, the spin in the same
> direction, when I spin one quickly (by hand) the other spins at a lower
> speed.
>
>
>
> Thanks for any help.
>
> Brian W-88T
>
>
>
>
>
>
>
> _______________________________________________
> Supras mailing list
> Supras at supras.com
> http://supras.com/mailman/listinfo/supras_supras.com
>