[Supras] MkIII - windshield wipers only work on the "interval" setting

[-Rich]

Replace the stalk assembly.  <-- super short version.
All the wires come out to one large connector under the dash.  Grab a 
TSRM and a multi meter.  <-- alternate short version.

I just did a repair similar to this where the headlights wouldn't turn 
on on a later model.  The inner plastic stalk piece had broke loose and 
was twisting with the outer control or somethign along those lines.   We 
fixed it with a spot of JBWeld.  In the process though, we pulled the 
stalk assembly from a early model (which didn't work with the later 
model) which was quite easy to do.  Soooo, if you have to, it's not too 
bad to pull that assembly.
-Rich



Jim Wooden wrote:

>Well in a rain storm yesterday I discovered my 86.5 MkIII windshield 
>wipers only work on the "interval" setting on either "low" or "high" 
>I get nothing.
>
>Before I dig into diagnosing the issue I wondered if anybody as 
>already been there done that and got a t-shirt story that might 
>shorten the troubleshooting process   ;-)
>
>Anybody?
>
>Thanks,
>Jim W.
>original owner 86.5 NA MkIII
>
>
>_______________________________________________
>Supras mailing list
>Supras at supras.com
>http://supras.com/mailman/listinfo/supras_supras.com
>
>  
>