[Supras] A1 Traction Arms from HPF

[joe@wilmcd.com]

I got measurements from bolt center to bolt center for the lower arm for
my car and also for an 88. They were a bit over an inch different. Or is
it the connection to the hub that's different? I don't know.

-Joe


> Joe, are you sure the 87 subframe is shorter? I pulled the diff.
> supports (which bolt across the bottom of subframe) from my 89T parts
> car and they bolted right to my 88T (hardtop and targa). Also have
> pulled and swapped upper arms (front and rear) and they're the same
> dimensions b/w the cars. I haven't swapped any lower arm parts but I
> thought they were the same dims.
>
>
>
> Brian W-88T
>
>
>
> Date: Thu, 18 May 2006 13:22:28 -0400 (EDT)
>
> From: joe at wilmcd.com
>
> Subject: Re: [Supras] A1 Traction Arms from HPF
>
> To: supras at supras.com
>
> Message-ID: <9320.216.204.14.102.1147972948.squirrel at www.wilmcd.com>
>
> Content-Type: text/plain;charset=iso-8859-1
>
>
>
> A1 was great to deal with and I gave them the sizes of the stock pieces
>
> for a couple of model years so hopefully that will cut down on the mess
>
> ups in the future. Apparently the guy that handled all the import stuff
>
> previously is gone so they are unfortunately relearning a few things.
>
> Great company to deal with though.
>
>
>
> -Joe
>
>
>
>> Apparently the 89 sub frame is 1" shorter then the 87.
>
>>
>
>> When I ordered directly form A1 they asked me what year car I had.
>
>>
>
>> When I said 87 they said ok the shorter ones then I said I was putting
> a
>
>> 89
>
>> subframe they said ok we'll give you the longer ones... So that's
> where
>
>> the
>
>> screw up could be.
>
>>
>
>> I'd call them to find out.. I could have the info reversed though....
> I
>
>> just
>
>> ordered mine.
>
>
>
>
>
>
>
>
>
>