[Supras] A1 Traction Arms from HPF

[Eric W]

Apparently the 89 sub frame is 1" shorter then the 87.

When I ordered directly form A1 they asked me what year car I had. 

When I said 87 they said ok the shorter ones then I said I was putting a 89
subframe they said ok we'll give you the longer ones... So that's where the
screw up could be. 

I'd call them to find out.. I could have the info reversed though.... I just
ordered mine.

-----Original Message-----
From: Supras-bounces at supras.com [mailto:Supras-bounces at supras.com] On Behalf
Of joe at wilmcd.com
Sent: April 28, 2006 7:23 AM
To: Dm19959 at aol.com
Cc: supras at supras.com
Subject: Re: [Supras] A1 Traction Arms from HPF

Yupper. Another member just verified for me that the center portion is too
long. It's 14" and 1" too long. I hope I can get them to send me a 12.5"
piece.
I should have just bought the $300 ones and wounldn't  have to be messing
with this :-\
Thanks for the verification!

-Joe
87T

>
> I have not had any personal experience with these trailing arms but a
> friend
> had the EXACT problem as you. He replaced the center portion as he simply
> could not get them to work in even their shortest setting.
>
> -Dean
>
>
> In a message dated 4/27/2006 6:45:36 P.M. Pacific Daylight Time,
> joe at wilmcd.com writes:
>
> I  received the following A1 Traction Arms today from HPF and have a
> question:
>
> http://www.horsepowerfreaks.com/sale/A1/Suspension/Traction_Arms/part/Rear
>
> At  the shortest setting they are 1" longer than the stock arms. This
> seems...  ummmm... bad to me. I am assuming I got the wrong parts? Any
> input would be  appreciated. Thanks.
>
> -Joe
> 87T
>
>
>
>



_______________________________________________
Supras mailing list
Supras at supras.com
http://supras.com/mailman/listinfo/supras_supras.com