[Supras] A1 Traction Arms from HPF

[dm19959@aol.com]

One end is custom the other is a standard heim joint.
 
-Dean 
 
-----Original Message-----
From: -Rich <rdp at ix.netcom.com>
To: FauxZ <fauxz at arizonagt.org>
Cc: supras at supras.com
Sent: Mon, 1 May 2006 11:36:12 -0500
Subject: Re: [Supras] A1 Traction Arms from HPF


If you guys can just buy the center section, can you just buy the 
endlinks or are they something custom made?
-Rich


FauxZ wrote:

>Well i didn't actually measure mine when i put them in.  I lined it up with 
>the stock piece and then cinched it down...  my problem was that my subframe 
>appears to be just a little tweaked so I used some of that adjustment to 
>square things up...  and before everyone totally wigs out, it's not cracked 
>or noticeably damaged.. just a little off...   besides, it's been that way 
>for 10 years now (when i bought the car) so i don't think it's going 
>anywhere... ;)
>
>
>z
>
>----- Original Message ----- 
>From: <joe at wilmcd.com>
>To: <supras at supras.com>
>Sent: Monday, May 01, 2006 4:35 AM
>Subject: Re: [Supras] A1 Traction Arms from HPF
>
>
>  
>
>>Oh, I hear ya. I just don't WANT to end up paying for their mistake but I
>>might end up doing it anyway. You would think they would have figured it
>>out by now.
>>
>>Thanks for measuring it. It seems like the length of the stock piece is
>>shorter on my 87T than on another guys 88 and your 90. Good to know.
>>
>>
>>-Joe
>>
>>    
>>
>
>
>
>_______________________________________________
>Supras mailing list
>Supras at supras.com
>http://supras.com/mailman/listinfo/supras_supras.com
>
>  
>


_______________________________________________
Supras mailing list
Supras at supras.com
http://supras.com/mailman/listinfo/supras_supras.com