[Supras] A1 Traction Arms from HPF

[joe@wilmcd.com]

Oh, I hear ya. I just don't WANT to end up paying for their mistake but I
might end up doing it anyway. You would think they would have figured it
out by now.

Thanks for measuring it. It seems like the length of the stock piece is 
shorter on my 87T than on another guys 88 and your 90. Good to know.


-Joe

> I have a 91, so it looks like it doesn't matter what year car you have,
> they
> don't work...  I called A1 on it, but didn't have the exact mesurements so
> I
> just fixed it rather than fight it..
>
> So i just went outside and actually measured mine (home now) and it's a
> 13.5" rod length... that gave me some adjustment... not lots mind you, but
> i
> wanted to make sure that i had as many of the threads as possible into
> that
> arm...
>
> Z
>
> ----- Original Message -----
> From: <joe at wilmcd.com>
> To: <supras at supras.com>
> Sent: Saturday, April 29, 2006 5:23 AM
> Subject: Re: [Supras] A1 Traction Arms from HPF
>
>
>> Yeah I could do that, but they are the ones that messed up. I'm not
>> about
>> to pay for it. I'm a little disappointed this many people have had this
>> issue and A1 hasn't fixed it. Although I've been having a conversation
>> with another member and it looks like the 87 and 88's are different part
>> numbers. We also measured bolt hol to bolt hole and got different
>> lengths.
>> When I talk to A1 I'll have to relay this information and make sure they
>> get the year of the car when people order.
>>
>> My center section is 14" which makes the bolt holes 1" too long. Even a
>> 13" piece would give me no adjustment. I'd prefer a 12".
>>
>> -Joe 87T
>>
>>> I had the same issue, and i orderd direct from A1...  I just went down
>>> to
>>> the local race shop and picked up two new center sections...  I'm not
>>> 100%
>>> sure, but I think they were 13" units...
>>>
>>> Z
>>>
>>> ----- Original Message -----
>>> From: <joe at wilmcd.com>
>>> To: <supras at supras.com>
>>> Sent: Thursday, April 27, 2006 6:29 PM
>>> Subject: [Supras] A1 Traction Arms from HPF
>>>
>>>
>>>>I received the following A1 Traction Arms today from HPF and have a
>>>>question:
>>>>
>>>> http://www.horsepowerfreaks.com/sale/A1/Suspension/Traction_Arms/part/Rear
>>>>
>>>> At the shortest setting they are 1" longer than the stock arms. This
>>>> seems... ummmm... bad to me. I am assuming I got the wrong parts? Any
>>>> input would be appreciated. Thanks.
>>>>
>>>> -Joe
>>>> 87T
>>>>
>>>>
>>>> _______________________________________________
>>>> Supras mailing list
>>>> Supras at supras.com
>>>> http://supras.com/mailman/listinfo/supras_supras.com
>>>>
>>>
>>>
>>>
>>
>>
>>
>> _______________________________________________
>> Supras mailing list
>> Supras at supras.com
>> http://supras.com/mailman/listinfo/supras_supras.com
>>
>
>
>