[Supras] Mounts

[berniek at technicaldevelop.com]

Hi again.  Just posted the mount info.  I do have a sketch of the Ford buscuit arrangement based upon rectangular steel tubing to support the buscuit pair (one inside and one outside) and a bolt on the opposite side of the tubing to act as the frame stud.  What makes it complex is the need to turn steel rings (probably from pipe) to fit within the buscuit voids, and weld them to the rectangular tubing.  The sketch is not that clear, but I probably can find it.  The time required to do that makes me think that limiting the stock mount rubber travel is probably the best bet.  Once metal to metal contact occurs, the rubber will not be further stressed.

    Bernie