[Supras] Trying to search old archives..HELP

[Jim Jobe]

Here's an old post:

> "Just asked the guy at the local napa associated store to see the motor
> mount book and had my mount for comparison. These are old time parts guys
> (father and son store) and don't mind helping with non-aplication specific
> things.
>
> Parts: motor mounts for mid 90s maxda/ford pick-up with 4 cyl (NAPA
> 602-1686). 7/16" mag wheel lug nuts (Dorman 711-108 or equivalent), 12 X
> 1.75 mm tap, 11/16" and 7/16" drill bits, Here is the proceedure:
>
> 1. Drill out the aluminum bracket to 11/16" (the 1 hole the mount stud goes
> through).
>
> 2. Buy a set of 7/16" mag wheel lug nuts, drill out the threads just enough
> to take off the tops of the threads, then retap the nuts to 12 X 1.75 mm.
> The nut will go through the bracket just like on a mag wheel. Nobody makes a
> mag nut in 12 X 1.75, at least not that I could find, and only Ford uses
> this thread on some of their trucks.
>
> 3. Trim the top side pin so it will go into the bracket, and remove the
> bottom pin, I used a cut-off tool.
>
> 4. Buy 2 12 X 1.75 strut mount nuts (self-locking) and 1/2" washers for the
> bottom stud."
>
> Todd
> 89T
>
>


On Sat, Jul 29, 2006 at 03:27:59AM -0400, SPOOLED91T at aol.com wrote:
> I made a post probalby 3 years ago about some replacement motor mounts i  
> found at Oreilly's. Included was the part number and other info. I need to find  
> this info to order another mount, but cant find anything trying to search the  
> archives. Please help!!  
> 
> Jason  Green
> 91 MA71T
> 05 XRunner
> 
> _______________________________________________
> Supras mailing list
> Supras at supras.com
> http://supras.com/mailman/listinfo/supras_supras.com