[Supras] maftpro

[Jim Jobe]

bah, that's nothing.  Popped a freeze plug on the dyno on a 530+ rwhp run.
First car in this video - red mk3.

http://video.google.com/videoplay?docid=12987847297126406&q=dayton+dyno+day

You will need to have the IAC/ICS connected for the TCCS to control idle
unless you go the moron route and crack the throttle open.

On Thu, Jul 27, 2006 at 01:05:45PM -0400, Peter wrote:
> Rich,
> I got a kick off the ending to that video, haha.
> I could probably come up with some funny ones myself.
> Have you tuned any yet? Its looking real good for just base maps, just 
> noticed its a little rich on take off.
> I still have my stock ics hooked up to an adapter pipe I made up. Im not 
> sure its doing anything though. Hows your all around idle with yours 
> disconnected?
> Thanks for the email.
> I will give you an update on my progress as it goes along, I need to get 
> that afr and 550s also, I just want to do everything in steps and take some 
> gtech readings to compare the numbers with each mod.
> Im running the 4.40 as well, thats what the unit is shipping with so I dont 
> think they all the bugs fixed out of the newer one., Are you running any 
> timing adjustments?
> 
> Peter
> 
> ----- Original Message ----- 
> From: "-Rich" <rdp at ix.netcom.com>
> To: "Brian Walker" <Brian.Walker at timmons.com>
> Cc: <psantos at cfl.rr.com>; <Supras at supras.com>
> Sent: Thursday, July 27, 2006 11:32 AM
> Subject: Re: [Supras] maftpro
> 
> 
> > I've been running the MAFTPRO with speed density & boost control 
> > successfully with 550's and a T04E 62-1 turbo for a few months now.  If 
> > you have any questions about the MAFTPRO, shoot 'em to the list because 
> > I've followed it pretty closely.  The only thing I haven't been able to do 
> > is run version 4.63 software.  My car runs frickin sweet on 4.4 though. 
> > <shrug>
> >
> > If you're thinking about the MAFTPRO, you might find my video 
> > entertaining:
> > http://www.poweredbythought.com/suprarebuild2006/video_misc/supra01.wmv
> >
> > If anyone hasn't seen my car:
> > http://www.poweredbythought.com/suprarebuild2006/
> > -Rich
> >
> >
> > Brian Walker wrote:
> >
> >>Peter, are you using an alternate IAT for these readings or the one
> >>supplying the signal for the speed density conversion? I wasn't aware
> >>the MAFTPro could display intake temps and I have wanted a separate
> >>gauge for some time but can't justify the $200+ for one. If it will
> >>display this, it's a bonus feature I didn't know I have.
> >>
> >>Timing control has been added in case you weren't aware, I'm waiting for
> >>the offseason to make the SD switch and start tuning myself.
> >>
> >>
> >>Brian W
> >>
> >>
> >>Date: Tue, 25 Jul 2006 16:58:46 -0400
> >>
> >>From: "Peter" <psantos at cfl.rr.com>
> >>
> >>Subject: [Supras] maftpro
> >>
> >>To: <supras at supras.com>
> >>
> >>Message-ID: <002301c6b02d$1ed68530$6401a8c0 at QUEENSILICA>
> >>
> >>Content-Type: text/plain; charset="iso-8859-1"
> >>
> >>
> >>Supras
> >>
> >>I finally did it, got a maft pro and hooked it up in speed density mode.
> >>
> >>
> >>I cant believe how easy it was to hook up and how good it runs with
> >>absolutely no tuning.
> >>
> >>Im waiting on a wideband to start the tuning. This weekend I plan on
> >>going to weigh the fat beast so I can start taking some gtech readings.
> >>
> >>
> >>The first useful tidbit of info I have gathered in the 90 degree Florida
> >>heat is that my IAT is ranging from
> >>
> >>105 with light driving
> >>
> >>125 after a 0-60 burst
> >>
> >>and 150 degrees 3 hours after being parked and shut off. I plan on
> >>taking more readings after I start tuning and datalogging, then the
> >>spearco replica ic will be swapped in, muahaha Peter
> >>
> >>
> >>
> >>
> >>
> >>_______________________________________________
> >>Supras mailing list
> >>Supras at supras.com
> >>http://supras.com/mailman/listinfo/supras_supras.com
> >>
> >>
> >>
> >
> >
> > -- 
> > No virus found in this incoming message.
> > Checked by AVG Free Edition.
> > Version: 7.1.394 / Virus Database: 268.10.3/395 - Release Date: 7/21/2006
> >
> > 
> 
> 
> 
> -- 
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.1.394 / Virus Database: 268.10.3/395 - Release Date: 7/21/2006
> 
> 
> _______________________________________________
> Supras mailing list
> Supras at supras.com
> http://supras.com/mailman/listinfo/supras_supras.com