[Supras] maftpro

[Peter]

Rich,
I got a kick off the ending to that video, haha.
I could probably come up with some funny ones myself.
Have you tuned any yet? Its looking real good for just base maps, just 
noticed its a little rich on take off.
I still have my stock ics hooked up to an adapter pipe I made up. Im not 
sure its doing anything though. Hows your all around idle with yours 
disconnected?
Thanks for the email.
I will give you an update on my progress as it goes along, I need to get 
that afr and 550s also, I just want to do everything in steps and take some 
gtech readings to compare the numbers with each mod.
Im running the 4.40 as well, thats what the unit is shipping with so I dont 
think they all the bugs fixed out of the newer one., Are you running any 
timing adjustments?

Peter

----- Original Message ----- 
From: "-Rich" <rdp at ix.netcom.com>
To: "Brian Walker" <Brian.Walker at timmons.com>
Cc: <psantos at cfl.rr.com>; <Supras at supras.com>
Sent: Thursday, July 27, 2006 11:32 AM
Subject: Re: [Supras] maftpro


> I've been running the MAFTPRO with speed density & boost control 
> successfully with 550's and a T04E 62-1 turbo for a few months now.  If 
> you have any questions about the MAFTPRO, shoot 'em to the list because 
> I've followed it pretty closely.  The only thing I haven't been able to do 
> is run version 4.63 software.  My car runs frickin sweet on 4.4 though. 
> <shrug>
>
> If you're thinking about the MAFTPRO, you might find my video 
> entertaining:
> http://www.poweredbythought.com/suprarebuild2006/video_misc/supra01.wmv
>
> If anyone hasn't seen my car:
> http://www.poweredbythought.com/suprarebuild2006/
> -Rich
>
>
> Brian Walker wrote:
>
>>Peter, are you using an alternate IAT for these readings or the one
>>supplying the signal for the speed density conversion? I wasn't aware
>>the MAFTPro could display intake temps and I have wanted a separate
>>gauge for some time but can't justify the $200+ for one. If it will
>>display this, it's a bonus feature I didn't know I have.
>>
>>Timing control has been added in case you weren't aware, I'm waiting for
>>the offseason to make the SD switch and start tuning myself.
>>
>>
>>Brian W
>>
>>
>>Date: Tue, 25 Jul 2006 16:58:46 -0400
>>
>>From: "Peter" <psantos at cfl.rr.com>
>>
>>Subject: [Supras] maftpro
>>
>>To: <supras at supras.com>
>>
>>Message-ID: <002301c6b02d$1ed68530$6401a8c0 at QUEENSILICA>
>>
>>Content-Type: text/plain; charset="iso-8859-1"
>>
>>
>>Supras
>>
>>I finally did it, got a maft pro and hooked it up in speed density mode.
>>
>>
>>I cant believe how easy it was to hook up and how good it runs with
>>absolutely no tuning.
>>
>>Im waiting on a wideband to start the tuning. This weekend I plan on
>>going to weigh the fat beast so I can start taking some gtech readings.
>>
>>
>>The first useful tidbit of info I have gathered in the 90 degree Florida
>>heat is that my IAT is ranging from
>>
>>105 with light driving
>>
>>125 after a 0-60 burst
>>
>>and 150 degrees 3 hours after being parked and shut off. I plan on
>>taking more readings after I start tuning and datalogging, then the
>>spearco replica ic will be swapped in, muahaha Peter
>>
>>
>>
>>
>>
>>_______________________________________________
>>Supras mailing list
>>Supras at supras.com
>>http://supras.com/mailman/listinfo/supras_supras.com
>>
>>
>>
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.394 / Virus Database: 268.10.3/395 - Release Date: 7/21/2006
>
> 



-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.10.3/395 - Release Date: 7/21/2006