[Supras] Starter

[Hacker J]

One trick to make that job easier is to remove the alternator.  You can then get a long 2 ft extension onto the bolt from the front side. Doing it this way I did not need to drop the tranny down.

Also, as noted before on this list, the 91-92 starter has threads in the flange, and so there is no nut to deal with.

Jon
90T

----- Original Message ----



Jusr replaced the starter about amonth ago. Most difficult job I have ever 
done! You will need to drop the transnission down alittle to get some room to 
get a very long extention and socket on the back side. I removed the 
transmission crossmember & rubber mount. Also once you break it loose you will need to 
hold the nut on the other side with something. I used a screwdiver. It took 
about three hours total because of all the things I tried. I also moved the clutch 
slave cyclinder and hose out of the way without disconnecting it. need to do 
this to get my hand up and over the starter to hold the nut and to re-install 
it.

Joe Mac


_______________________________________________
Supras mailing list
Supras at supras.com
http://supras.com/mailman/listinfo/supras_supras.com




__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com