[Supras] Starter

[Bigmacz28 at aol.com]

Jusr replaced the starter about amonth ago. Most difficult job I have ever 
done! You will need to drop the transnission down alittle to get some room to 
get a very long extention and socket on the back side. I removed the 
transmission crossmember & rubber mount. Also once you break it loose you will need to 
hold the nut on the other side with something. I used a screwdiver. It took 
about three hours total because of all the things I tried. I also moved the clutch 
slave cyclinder and hose out of the way without disconnecting it. need to do 
this to get my hand up and over the starter to hold the nut and to re-install 
it.

Joe Mac