[Supras] Fwd: Re: need help with maftpro

[-Rich]

In SD mod w/ the MAFTPRO, you don't need IC pipes to run at all.  MAP 
sensor is manifold, AIT sensor is usually installed at or near the 3000 
pipe.

t72pwrd wrote:

>Don't want to sound like a broken record, but I'm still betting boost leak, 
>What you're describing sounds like the way my VPC'd car would behave when I 
>blew an IC pipe off.  How much boost is building?
>----- Original Message ----- 
>From: "Clark E. Wireman" <yotaracer28 at yahoo.com>
>To: <supras at supras.com>
>Sent: Saturday, July 29, 2006 6:52 PM
>Subject: [Supras] Fwd: Re: need help with maftpro
>
>
>  
>
>>well i backed the static fuel pressure down to 26 psi and noticed that on 
>>the afr tracking my min tps was set to 4 my tps only reads from .4 to 3.4 
>>so i adj that down to 2.9 and adj my mainscale to from 0 to 9 it finally 
>>builds boost not much before it cuts out again its like a fast stutter not 
>>like a fuel cut..... but at least i got some boost and the blowoff is 
>>popping lol any other ideas? i really need to get that lc1 installed most 
>>importantly huh?
>>
>>Note: forwarded message attached.
>>__________________________________________________
>>Do You Yahoo!?
>>Tired of spam?  Yahoo! Mail has the best spam protection around
>>http://mail.yahoo.com
>>    
>>
>
>
>--------------------------------------------------------------------------------
>
>
>  
>
>>_______________________________________________
>>Supras mailing list
>>Supras at supras.com
>>http://supras.com/mailman/listinfo/supras_supras.com
>>
>>    
>>
>
>
>_______________________________________________
>Supras mailing list
>Supras at supras.com
>http://supras.com/mailman/listinfo/supras_supras.com
>
>
>  
>